Skip to main content

FlashScan V2 Hardware Specification - Knowledgebase / FlashScan V2 / FlashScan V2 Hardware Configuration - EFILive Service Desk

FlashScan V2 Hardware Specification

Authors list

FlashScan V2 Communications Protocols & Voltage

  • SAE-J1979 CAN protocol.
  • SAE-J1850 VPW protocol.
  • Vehicle Input Voltage - Min 9V, Max 14V.

FlashScan HD Communications Protocols & Voltage

  •  SAE-J1939 CAN protocol.
  • Vehicle Input Voltage - Min 9V, Max 24V.

V2 and HD Hardware Specification

  • Built-in LCD screen.
  • Built-in audible alarms.
  • Upgradeable bootblock and firmware.
  • External analog, digital, serial & thermocouple inputs.
  • 8MB internal memory, 6MB (approx.) available for tune/log files.
  • SD memory card slot. Supports SDSC V1.0, SDSC V1.01, SDHC V2.0 up to 32GB. SD Cards with a capacity of less than 64MB not supported.
  • Supports 221 VIN Licenses.

Systems Requirements

  • PC or laptop capable of running Windows 7, 8, 8.1 or 10.
  • Optical drive.
  • USB port.
  • Color screen with 1024x768 or greater resolution.
  • 200MB of available disk space.

Integrates with:

Helpful Unhelpful

31 of 37 people found this page helpful

Add a comment

Please log in or register to submit a comment.

Need a password reminder?