Skip to main content

FlashScan License Status - Knowledgebase / FlashScan V2 / FlashScan V2 Licensing - EFILive Service Desk

FlashScan License Status

Authors list

Tuning Licenses

Follow these steps to determine the tuning license status on your FlashScan.

  1. Connect your FlashScan device to  your PC.
  2. Open the EFILive V8 Scan and Tune application.
  3. Select the [F7: License] option in the left-hand  pane.  
  4. Select [F2: Hardware] to display Tuning License details.

What does this display mean?

  1. Device Summary Tabs:    
    1. Firmware - displays Product type, Boot Block and Firmware Versions
    2. VIN Licenses - Installed, Used and Available license summary.
    3. Flash Counters - total number of Cal Flashes and Full Flashes performed.
  2. Tuning License Summary:    
    1. Scanning and Logging - activated on all FlashScan and AutoCal devices.
    2. GM Tuning - enables Flashing for GM supported vehicles.
    3. Cummins Tuning - enables Flashing for Dodge Cummins supported vehicles.
    4. Cummins HD - enables Flashing for Cummins HD supported vehicles (this option is only available of FlashScan/AutoCal V3 and FlashScan/AutoCal HD products).
    5. Pro Tuning - not yet available. 

To purchase additional Tuning Licenses for FlashScan V3 or FlashScan V2;

  1. Click on the Purchase Tuning License Activation Code(s) link to order products. 
  2. Copy your Serial Number from the Serial Number display. 
  3. Enter emailed Activation Code and select Activate.  

VIN Licenses

TCM Licenses are free for customers running V8.3.1 software (or later) and licensed TCMs are no longer displayed. 

Follow these steps to determine the VIN license status on your FlashScan .  

  1. Connect your FlashScan device to  your PC.
  2. Open the EFILive V8 Scan and Tune application.
  3. Select the [F7: License] option in the left-hand  pane.  
  4. Select [F3: VINs] to display VIN License details.
  5. For VIN License purchases, click the [Generate Auth Code] button. The Authentication Code will be shown in the Auth Code field. 

Stream Licenses

Stream Licenses are no longer available for purchase on FlashScan V2.  Where a customer purchases FlashScan V3, a previously purchased V2 Stream License Transfer service is available.

Follow these steps to determine the Stream license status on your FlashScan.

  1. Connect your FlashScan device to  your PC.
  2. Open the EFILive V8 Scan and Tune application. 
  3. Select the [F7: License] option in the left-hand  pane.
  4. Select [F3: Streams] to display Stream License details.


Helpful Unhelpful

10 of 22 people found this page helpful

Add a comment

Please log in or register to submit a comment.

Need a password reminder?